Computer Hardware Black Friday Discount Offers [2021]

Nzxt Kraken G12 Black Friday Deals 2022

Nzxt Kraken G12 Black Friday DealsNZXT’s Kraken G12 mounting kit has been announced by the company. It allows video cards to mount an open-loop liquid cooling cooler. The adapter, which can be used in conjunction with a cooler to Nzxt Kraken G12 Black Friday Deals 2022 significantly lower GPU temperatures and increase cooling of VRMs, is compatible with a variety of coolers and cards. Because of their small dimensions and high efficiency, closed-loop liquid cooling (LCSes), for CPUs has gained popularity in recent years. High-performance GPUs are more efficient than other CPUs and produce greater heat. However, not all LCSes can be used with graphics cards straight out of the box. Corsair, for example, offers special adapters (brackets), to make their liquid coolers compatible with most graphics boards. NZXT, however, is one of the few vendors that offer mounting kits that can be used with not only the company’s LCS but also with other liquid coolers.

The NZXT Kraken G12, a simple device, is compatible with various waterblocks made by NZXT and other vendors such as Thermaltake, Antec and Zalman. It also supports multiple reference and non-reference GPUs based on NVIDIA or AMD GPUs (see table). The Kraken G12 has a fan that measures 92mm in diameter and can cool down components of video cards that aren’t covered by the LCS. This fan can be used to cool VRM components such as DRAM chips or MOSFETs (inductors), capacitors, etc. This is vital, as they can get extremely hot under high loads. It released the Kraken G10 bracket several years ago for then-contemporary coolers, and video cards.

Nzxt Kraken G12 Black Friday Deals 2022– Sales Discount Offer

The Kraken G12 expands the compatibility list, adds a fan with a lower rotation speed and offers a white option. Technically, the Kraken G12 is compatible with five different LCSes. These compliant closed loop liquid coolers, which are manufactured by Asetek, are suitable for standard CPU sockets. It is unrelenting in its ability to make progress over consoles. That’s what I love about it. Pushing graphics, pushing technology, pushing brute force horsepower and all this without a second thought. My personal rig has an RTX2080 Ti, which allows me to pursue my passion for pushing technical boundaries.

Two years ago, I modified my 1080 Ti with an EVGA All-In-One cooler. I was curious to see what results I would get if I made a similar modification to my 2080 Ti. This journal would also serve as an educational tool to help others if they are interested in doing similar mods. Before I dive in, a quick note. I’m not an expert. I don’t claim that I know everything. My 2080 Ti is also the Zotac AMP Edition (specs are below), which has a triple fan cooler. My expectations were not to see an increase in temperature, but noise. While the triple fans on Zotac are effective at dispelling heat they can be quite loud under load. Noise is something that I care about. So I was hoping this mod would address it. Please note that the Zotac AMP Edition2080 Ti is the only one I will be discussing. This guide is not intended to be used as a reference for other graphics cards. Here are the specifications of my Zotac AMP Edition2080 Ti. I purchased the NZXT Kraken G12 bracket separately. I used the Gamers Nexus toolkit, which was not sponsored.

Nzxt Kraken G12 Black Friday Deals 2022– Guide

I also purchased the Arctic Silver 5 thermal compound. This will be covered in more detail later. When purchasing thermal compound, it is important to choose one with high thermal conductivity. (W/m-K stands for Watts per Meter Kilvin). This time, I will show you the before and after photos of my computer once the mod was complete. Before: First, and then after: An AIO makes cable management more complicated because there are more cables to manage. But, my Lian Li case had good airflow so I didn’t worry too much about it. The GPU AIO is located at the bottom Lian Li O11 Dynamic Case, taking fresh air in a push configuration. The side is occupied by three Lian Li Bora Digital Fans, which act as intake. The CPU AIO is mounted at the top of each case to exhaust air in a push-type configuration. First, I removed the four screws holding down the graphics card heatsink. Next, I removed this side screw.

Carefully, I removed the heat sink. You will feel some resistance to the thermal compound. Use a steady, measured force to lift your heat sink. As you can see, there are wires that connect the heat sink to the printed circuit board (PCB) of your graphics card. As you can see, the wire I am holding is the one that starts pulling away from the board. Make sure to disconnect it first. The other wires were then removed. After all the wires were removed, this is how the heat sink looked. The inner plate of the Zotac AMP Edition 2080 Ti is visible. The inner plate is made from plastic and is secured to the backplate by screws. To properly install the Kraken G12 mounting bracket, this inner plate must be removed. I removed the inner board by removing both the screws on this backplate and the screws on the rear-IO. AIO’s have become increasingly popular with both enthusiasts and users of PCs. Almost all the top CPU cooling companies, except Noctua, offer at least one model for closed-loop liquid cooling systems. What about graphics cards, with all the liquid AIO options available for CPUs and processors? What would a similar system look like for graphics cards? How could it be cost-effective and still work well in reducing temperature? The Kraken G12 is now available from NZXT…

The NZXT Kraken G12 mount kit is designed to attach to a graphics card and a closed-loop liquid cooler (AIO). The G12 supports NZXTs Kraken X42/X52/X62 all-in-one coolers. It also supports models from companies like Corsair and Antec as well as Thermaltake and Zalman. The full compatibility list is available in the technical specifications. Here’s what NZXT says about the Kraken G12: “Fast mount any Kraken Series liquid cooling unit onto your graphics cards using the Kraken G12 mounting kits. The Kraken G12 has a 40% cooling increase over stock cooling. It also features a new bracket that is easier to install than the Kraken G10. The G12 is compatible to more than 30 liquid cooling products on the market. The box’s front features a simple illustration of Kraken G12, which appears minimalistic. However, we will be able to see more about it in the NZXT Kraken G12 review (2). NZXT included an extensive installation guide that explains how to connect the Kraken G12 to any AIO cooler on the supported list. (Refer to the technical specifications for details if you are unsure).

The Kraken G12 bracket is black, but it’s actually white in the box. We also have brackets and mounting screws to attach your GPU and a fan with a 1500rpm 92mm fan. It has rifle bearings that are 3 pin and 25mm deep, the same size as standard case fans. You can choose from two colour options at retail. However, if you are unhappy with one of them, it is easy to modify.

Perhaps a coat of paint could add some style to it. It would most definitely void your warranty. NZXT Kraken G12 review (3) Closer Look – NZXT Kraken G12 A closer look at this bracket shows that it is very simple and straightforward. The main panel has large holes to mount the fan (92mm) which is designed for VRM cooling. There are also two holes for the AIO closed-loop cooler that you choose to use. NZXT Kraken G12 review (4) The bracket has a stenciled NZXT logo on the right side. Nzxt Kraken G12 Black Friday Deals 2022 This includes ventilation holes to vent the exhaust from the VRM fan at 92mm 1500rpm. Although this could be an issue for those who don’t like warm air being pumped back into the case by design, it is relatively good.


Back to top button