The NZXTH500 was my favorite mid-tower case. It was affordable, compact, and had a beautiful design. The original concept has been updated and now the H510 series. I think it is quite amazing. NZXT’s H510 Elite, Nzxt H510 Elite Black Friday Deals 2021 which is a display case that showcases your system and has everything you could want, is exactly what you need. The H510 Elite is priced at $170 (UK Price as yet unknown), but it faces stiff competition from the H510i and H510i chassis. If you have RGB fans that were part of a previous build, the H510i or H510i could be a good option. Although the exterior of the NZXT H510 elite shares many similarities with other H series cases has, it features a tempered glass front panel, smaller front I/O areas, and RGB-lit fans.
The H510 Elite is made of tempered glass, steel, and plastic and weighs in at 16.5 lbs (7.48 kg). The $170 chassis comes with an extended warranty of two years. Amazon: Corsair HX1200i for US$699 Image 2 of 2 The compact, newly designed I/O area at top features one USB3 Gen2 Type C port and one USB3 Gen1 Port. It also includes a headphone/microphone combo jack, and a power button. The top panel has a 140x140mm area with slotted screws that can hold both 120mm and 140mm fans. Image 1 of 4. The frame is attached to the tempered-glass front and side panels via push pins at the corners. The front panel is secured by a single thumbscrew. Two small Philips-head screws are used to secure it. It houses two of the case’s RGB fans. The other side panel is made of stamped steel and secured at the rear by captured metal thumbscrews.
Nzxt H510 Elite Black Friday Deals 2021– Sales Discount Offer
The front panel has a 2×16 inch strip of ventilation holes. This is a dual-layer black metal mesh, which is a coarse perforated material but backed with fine metal screening material. It allows fresh air to flow into the chassis. Image 1 of 2. At the rear of your chassis you will find an opening to mount a PSU and seven standard expansion cards slots. Two vertical slots are for showing off your graphics card. An exhaust-fan mounting location is also available. It has a 120mm fan. The bottom of the PSU intake hole is covered by a removable mesh filter made from plastic. To allow air to enter the power supply, the large rubber-coated feet hold the case about one inch above the ground. Image 1 of 3. The basic, yet effective filtration system will prevent most dirt and dust particles entering your system. The small size of both the side and front filters will mean that you’ll need to clean them more often. Side note:
The NZXT 510 Elite does not have a fan at the top mounting position. It also lacks a filter. This is because nearly all previous H series chassis, even budget models, we tested had both. If you recall, the S340 Elite was NZXT’s first Elite case. It had a tempered side panel, NZXT Puck and new SSD mount. The new Elite models feel a bit bland, so I believe this will be the most popular H500 series enclosure going forward. This case costs $149 on the global market and $169 in the US. The H510i, which includes the Smart Device V2 and the LED strip, is $69 cheaper. The Elite has a $50 premium over the H510i, which gives you the two front fans that are 140mm Aer RGB 2 and sell for a substantial amount. If you are looking for the H510 Plus and were considering buying fans, this is the best option. You’ll be saving some money. This is a great way to show off the NZXT enclosure’s front panel TG integration. They have finally joined the multi-side temperglass club.
Nzxt H510 Elite Black Friday Deals 2021– Guide
Given that the panel is removable, I’m sure they are creating a mesh panel to increase the exposure of the case when they update it further. Perhaps a H510 Mesh, or something similar. This refresh also includes several other changes, aside from the front panel TG panel. The I/O has been reduced to one USB3 port in purple. This is very cool. It also includes a power button and a USB Type C Gen2 port. There is also a combo audio jack that uses a half-red headphone adapter. A front-panel combo connector has a splitter adapter to make sure it fits your motherboard. It is a bit odd that the Elite model does not include the top exhaust fan. There is also no dust filter, as opposed to the H500 and S340 cases. One 120mm fan is included for the rear exhaust.
The bracket on the front of the case supports a radiator up to 280mm. It is now slightly closer to front but completely covered with a thin dust filter at the bottom and a mini one at top. The TG mount is simple and I love it. However, the sides and front panels do a bit of wobbling at the bottom. It’s fine for a $69 case, but it’s not as elite when you pay $149 for the Elite model. The Elite frame is identical to the cheaper cases and the less expensive versions but has more bling. The motherboard tray is also a little bent, and the PCIe slots section does not have thumbscrews. To complement the new SSD caddies, the mesh on the PSU shroud has been made uniform. The caddies can be moved anywhere on the shroud. This Smart Device v2 is also available. It must be connected via USB to control fan speed and color via the CAM software. You don’t need to log into to set up fans or your LED strips. It also remembers your settings after restarting.
They are also perfectly centered. The blackout section on each side panel hides the LED strip built into the top. It’s quite dim, which surprised me. I would prefer to see more interior spillage. The cable management system behind the case features multi-channel areas in the main opening and a corner section that houses fan and CPU cables. The hard drive cage is located in the PSU section. I was surprised to see no drive caddies there. This was an issue with the S340 Elite and the S340 Elite. It also happened with the H500 Elite and the H510 Elite. System BuildingNow it’s time for you to start building. It’s easy to build, even though the interior is the same as the original H500. The cables are hidden behind the bar. Nzxt H510 Elite Black Friday Deals 2021 The power supply cables for GPU exit at the correct spot. And the lack of top fans makes it very easy to connect the 8-pin CPU cable. The frame is compact enough to support motherboards up to ATX despite its small size.